Emerson I-0021 Manuel D’Utilisation

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

NGA 2000

↓↓

Analyzer module setup

↓↓

Range parameters

↓↓

Begin and end of ranges

↓↓

In the menu "Begin and End of Ranges" you can set up the begin and end of range for
each range of the current channel. To change to the other channels of an MLT analyzer or
analyzer module, you have to press the F3 key.

Set up parameters:

♦ 

Select any line of variables with the 

↓↓

 -key or the 

↑↑

 -key.

♦ 

Select the variable with the 

88 

 -key or the 

→

→

 -key.

♦ 

Select any digit with the 

←

←

 -key or the 

→

→

 -key and adjust a new value with

the 

↑↑

 -key or the 

↓↓

 -key

resp. select the whole value with the 

↑↑

 -key or the 

↓↓

 -key.

Allowed minimum/maximum range values:
Concentrations in the lines "Absolute, range lower/upper limit"
of the menu "Autoranging Control" (see p. 5-29).

♦ 

Confirm the new value with the 

88 

 -key or

cancel and go back to the last value with the F2 key.

Lines "Actual begin of range" / "Actual end of range":

In these lines you will find the begin and end of the current range.

Measure

Channel

Back...

TAG

95.00 ppm

-- Begin and End of Ranges --

Begin of range -1:

0.00  ppm

Begin of range -3:

0.00  ppm

Begin of range -4:

0.00  ppm

End of range -1:

50.00  ppm

End of range -2:

250.0  ppm

End of range -4:

10000  ppm

Begin of range -2:

0.00  ppm

End of range -3:

2500  ppm

Actual begin of range:

0.00  ppm

Actual end of range:

250.00  ppm