Samsung RF323TEDBSR Manuel D’Utilisation

 

operating

Operating your French Door 
Refrigerator

USING THE CONTROL PANEL

RF323TE** 

Touching this button turns Energy Saver 

mode on and off. When you turn Energy 

Saver on, the Energy Saver icon lights.

Turn Energy Saver off and the icon 

goes off. The Energy Saver function 

automatically turns on when power is 

supplied to the refrigerator.

If condensation or water drops appear 

on the doors, turn the Energy Saver 

mode off.

 

Touch this button to set the freezer to 

your desired temperature.

You can set the temperature between 

-8°F and 5°F (between -23°C and 

-15°C). Touch and hold this button for 3 

seconds to decrease the time needed 

to freeze products in the Freezer. It can 

be helpful if you need to quickly freeze 

easily spoiled items or if the temperature 

in the freezer has warmed dramatically 

(For example, if the door was left open).

This button serves two purposes:

1)  To turn the door open alarm on and off

     If the door alarm is set to On, an alarm 

beeps if any refrigerator door is left 

open for more than three minutes.

     The beeping stops when you close the 

door. The door alarm function is pre-

set to On in the factory. You can turn it 

off by touching and then releasing this 

button. You can turn it back on in the 

same fashion. The icon lights up when 

the function is on.

2)  To reset the water filter life indicator.

     After you replace the water filter, touch 

and hold this button for 3 seconds to 

reset the water filter life indicator.

for C↔F

Touching this button turns on the 

Dispenser LED lamp (under the display) 

in continuous mode so that it stays on 

continuously. The button also lights 

up. If you want the Dispenser lamp to 

come on only when some one uses the 

dispenser, touch this button to turn the 

continuous mode off. Touch and hold 

this button for 3 seconds to switch the

temperature units between °C and °F. 

 

Touch this button to set the fridge to 

your desired temperature. You can set 

the temperature between 34°F and 44°F 

(between 1°C and 7°C). Touch and hold 

this button for 3 seconds to decrease 

the time needed to cool products in 

the Refrigerator. It can be helpful if you 

need to quickly cool easily spoiled items 

or if the temperature in the fridge has 

warmed dramatically (For example, if the 

door was left open).

If you don’t want to make more ice, 

touch this button. Also, pressing this 

button for 3 seconds turns on Child 

Lock which locks the display panel and 

dispenser buttons so the buttons can not 

be used. The Child Lock icon lights up to 

indicate you’ve activated the Child Lock 

function. Press 3 seconds to unlock.

Press the Cubed Ice or Crushed Ice 

button to select the type of ice you 

want dispensed. Each time you press 

the button, the cubed and crushed 

ice modes alternate and the Cubed or 

Crushed ice icon lights up, indicating 

your selection.

If you don’t need ice, turn the function 

off to save on water and energy 

consumption (See Ice Off below).

(Cubed) (Crushed)

Cooling Off mode (also called Shop 

mode), is designed for use by retailers 

when they are displaying refrigerators on 

the shop floor. In Cooling Off mode, the 

refrigerator’s fan motor and lights work 

normally, but the compressors do not 

run, and the refrigerator and freezer do 

not get cold. To start Cooling Off mode, 

touch and hold the Energy Saver button 

and the Freezer button for 5 seconds 

during normal operation. The refrigerator 

chime sounds and the temperature 

display flashes OF OF.

To cancel Cooling Off mode, touch and 

hold the Energy Saver and the Freezer 

buttons again for 5 seconds.

10

9

1

2

3

5

6

4

7

8

DA68-02603A-03.indb   12

13. 4. 25.   �� 2:12