Samsung RFG296HD Manuel D’Utilisation

 

operating

Controlling the fridge temperature

The fridge temperature can be set between between 
34°F and 46°F (or between 7°C and 1°C) to suit your 
particular needs. Press the Fridge button repeatedly 
until the desired temperature is shown in the 
temperature display. The temperature will change by 
2°F (or 1°C) with each press. See below.
Fahrenheit :  38°F ➞ 36°F ➞ 34°F ➞ 46°F ➞ 44°F ➞
42°F ➞ 40°F ➞ 38°F.
Centigrade :  3°C ➞ 2°C ➞ 1°C ➞ 7°C ➞ 6°C ➞ 5°C
➞

 4°C ➞ 3°C.

The temperature control process for the Fridge works 
just like the Freezer process. Press the Fridge button 
to set your desired temperature. After a few seconds, 
the Fridge will begin adjusting towards the newly set 
temperature. This will be reflected in the digital display.

-  The temperature of the Freezer, Fridge or Pantry 

Room may rise when you open the doors too

   frequently, or if a large amount of warm or hot food 

is placed inside.

-  This may cause the digital display to blink. Once the 

freezer and Fridge temperature return to their normal 

set temperatures, the blinking will stop. 

-  If the blinking continues, you may need to “reset” 

the refrigerator. Try unplugging the appliance, wait 

for around 10 minutes and then plug the power cord 

back in. 

-  If there is a communication error between the 

Display and Main Controller, the Pantry Display light 

may blink. If the blinking continues for a long period 

of time, please contact a Samsung Electronics 

Service Center.

USING THE COLD WATER 
DISPENSER

Push the appropriate ice type button to 
select what you want dispensed.

Place a glass underneath the ice 
dispenser and push gently against the 
dispenser lever with your glass.
Make sure the glass is in line with 
the dispenser to prevent the ice from 
bouncing out.

Please wait 2 seconds before 
removing the glass under the 
dispenser to prevent spills.

If the Refrigerator door opens, the Dispenser does not 
work.
 

When Cubed Ice is selected after using the 
Crushed Ice mode, a small amount of residual 
crushed ice might be produced.

 

Do not pull the lever out. You could damage 
or break the lever's spring.

•  To clean the ice bin/

bucket, wash with a 
mild detergent, rinse 
well, and dry thoroughly 
it. Do not use harsh or 
abrasive cleaners or 
solvents.

•  When you select 

Cubed Ice after using 
the Crushed Ice mode, 
a small amount of 
residual crushed ice might be produced.

•  If ice doesn’t come out, pull out the ice bucket and 

press the test button located on the right side of ice 
maker.

•  Do not press the test button continuously when the 

tray is filled with ice or water. Water may overflow or 
ice may jam the bucket.

•  Normal  Use
   To fill the ice bucket to maximum capacity after 

installation, follow these steps:

 

1.  Allow your refrigerator to operate and cool down 

for 24 hours (or 1 full day).

       -  Waiting 24 hours will allow your ice maker to 

cool properly.

CAUTION

CAUTION

CAUTION

NO ICE

Select this if you want to 

turn ice maker off

check the 
water level

Test button

Recommend Temp (Fridge) : 38°F (or 3°C )

DA68-02488A-11.indb   14

14. 5. 14.   �� 11:45