Samsung RM255BASB Manuel D’Utilisation
For the disassembly of evaporator cover, water
tank and partition should be disassembled
first.
1. Remove the cap screws(4 pieces), and remove
tank and partition should be disassembled
first.
1. Remove the cap screws(4 pieces), and remove
other screws(4 pieces).
3. Insert the flat-tip screwdriver into the center of
insulation-partition, and lift it up slightly to open
the door in the lower compartment. then lift the
insulation-partition upward to separate.
the door in the lower compartment. then lift the
insulation-partition upward to separate.
DISASSEMBLY AND REASSEMBLY
evaporator cover in the Refrigerator
2. Pull the upper part of the evaporator cover slightly.
3. Separate the housing terminal connected to the
right side of evaporator cover, and lift it up carefully
using both hands.
using both hands.
The evaporator fan is located in the middle rear
of the freezer. This fan circulates cold air in the
freezer.
1. Remove screws (4 pieces) from the four
of the freezer. This fan circulates cold air in the
freezer.
1. Remove screws (4 pieces) from the four
corners of the fan bracket.
2. Disassemble the fan motor.
Evaporator Fan Motor in Refrigerator
55
55