Samsung 65609 Manuel D’Utilisation

17. Remove screw and cover from the front top-left corner 

of the refrigerator. Reinstall the cover on the front  

top-right corner and secure it with the screw.

18. Pull the loose end of the wire harness from opening  

in the refrigerator top. Pull the loose end of the wire 

harness and the ground wire from the opening in the 

top of the refrigerator door. Being careful not to pinch 

the wires, install the left-upper hinge and secure it  

with the three bolts.

 

NOTE: The reversing door parts are supplied with the 

refrigerator. They are located in the bottom refrigerator 

door shelf.

19. Connect the ground wire to the top hinge and secure 

with screw. Connect the Housing connector to the 

wire harness coming from the top of the door. Con-

nect the reed switch connector to the wire under the 

upper left hinge cover. The third wire coming from the 

top of the refrigerator is not used.

      

NOTE: The reversing door parts are supplied with the 

refrigerator. They are located in the bottom refrigerator 

door shelf.

NOTE: If the reed switch is not reconnected, an  

alarm bell will go off in 2–3 minutes and the fridge 

temperature display will flash. If the housing connector

is not reconnected, the entire temperature display will 

not come on.

20. Carefully install the left-upper hinge cover over the 

wires and hinge and secure with screw.

21. Check the door alignment, door opening, and  

operation of the refrigerator and freezer lights by 

opening the refrigerator and freezer doors.

Do not damage the wires or connectors. Pinched or 

cut wires or damaged connectors can result in electric 

shock, fire, personal injury, and/or product failure.

Left Hinge Cover

Reed Switch Connector

Housing Connector

Unused Wire

Ground Wire

DA99-01921A (EN-1).indd   15

2010.3.16   1:7:33 PM