Samsung 65609 Manuel D’Utilisation

Now that the refrigerator has been assembled, position 

and level the refrigerator.
The refrigerator has two front leveling legs—one on the 

right and one on the left. Adjust legs to alter tilt from front 

to back or side to side. If the refrigerator seems unsteady 

or if you want the doors to close more easily, adjust the 

refrigerator’s tilt using the instructions below: 
NOTE: Make sure it meets all the requirements listed  

on page 9.
1. Plug the refrigerator’s power cord into a 3-prong 

grounded outlet. Move the refrigerator into its final

position.

2. Open the refrigerator door and place a level on the 

lower shelf. Check to make sure it is level from side  

to side and front to back.

NOTE: Having someone push backward against the top 

of the refrigerator takes some weight off the leveling legs. 

This makes it easier to adjust the legs.

3. If it is not level, adjust the front leveling legs until the 

refrigerator is level. Using a screwdriver, turn the leg 

counterclockwise to extend the leg and raise the 

refrigerator at that point. Turn the leg clockwise to 

retract the leg and lower the refrigerator at that point.  

It may take several turns of the leveling leg to adjust  

the tilt of the refrigerator.

4. Open both doors again and check to make sure that 

they close easily. If not, tilt the refrigerator slightly more 

to the rear by turning both leveling legs clockwise.  

It may take several more turns, and you should turn 

both leveling legs the same.

5. Readjust if necessary.

When the left side is lower.

Control Lever

Screwdriver (–)

When the left side is higher.

Both control levers must be securely touching the floor  

to avoid possible personal injury or property damage 

because of tipping.

Control Lever

Screwdriver (–)

DA99-01921A (EN-1).indd   16

2010.3.16   1:7:34 PM