Tektronix TVS600 & TVS600A Series Manuel D’Utilisation
STATus Subsystem
2–152
TVS600 & TVS600A Command Reference
STATus:OPERation? (Query Only)
Returns the contents of the Operation Status Register as a decimal number. The
Operation Status Register, described in Table 2–2, identifies normal events, such
as acquisition, that are in progress. Use the Operation Status Enable Register to
determine which Operation Status events can set the Operation bit (bit 7) in the
Status Byte Register.
Operation Status Register, described in Table 2–2, identifies normal events, such
as acquisition, that are in progress. Use the Operation Status Enable Register to
determine which Operation Status events can set the Operation bit (bit 7) in the
Status Byte Register.
Table 2–2: The Operation Status Register
Bit
Decimal
Value
Value
Function
0
1
Calibrating shows that a calibration routine is in progress.
1–3
Not used.
4
16
Measuring/Acquiring shows that measurement or acquisition
is in progress.
is in progress.
5
32
Waiting for Trigger shows that the acquisition system is
armed and waiting for a trigger event.
armed and waiting for a trigger event.
6
64
Waiting for Arm shows that the acquisition system has been
initialized with INIT and is waiting to be armed.
initialized with INIT and is waiting to be armed.
7
Not used.
8
256
Testing shows that a self test routine is in progress.
9
512
CH 1 Probe shows that a probe is attached to the Channel 1
input.
input.
10
1024
CH 2 Probe shows that a probe is attached to the Channel 2
input.
input.
11
2048
CH 3 Probe shows that a probe is attached to the Channel 3
input.
input.
12
4096
CH 4 Probe shows that a probe is attached to the Channel 4
input.
input.
13–15
Not used.
STATus:OPERation[:EVENt]?
<event>
Query Response
Not applicable
<NR1>
Not applicable
Syntax
Parameters
Reset Value