Tektronix TVS600 & TVS600A Series Manuel D’Utilisation

SYSTem Subsystem

TVS600 & TVS600A Command Reference

None

None

Command:

SYSTem:AUT:TRIG CHAN

TRIGger:LEVel
SYSTem:AUToset:VOLTage
SYSTem:AUToset:SWEep

Sets VOLTage:RANGe:UPPer and VOLTage:RANGe:LOWer so that the
incoming signal fills the center 90% of the peak to peak range.

Multiple acquisitions of an arbitrary period of 20ms will be acquired with peak
detect circuits enabled to find the peaks of the signal. This implies that the
incoming signal should be a repetitive 50Hz signal or faster.

It is the responsibility of the host application to preset all related settings such as
bandwidth filters, couplings, vertical settings, and so on.

After autoset completes, the host application can query VOLTage:RANGe:UPPer
and LOWer or VOLTage:RANGe PTPeak and OFFSet to find out what was
done.

SYSTem:AUToset:VOLTage <channel>

CHAN[1]
CHAN2
CHAN3
CHAN4

Not applicable

None

Not applicable

Command Error –141, “Invalid character data”
Attempted to autoset IMMediate or any other illegal value.