Tektronix TVS600 & TVS600A Series Manuel D’Utilisation
SYSTem Subsystem
2–190
TVS600 & TVS600A Command Reference
SYSTem:COMMunicate:SERial:BAUD
SYSTem:COMMunicate:SERial:BAUD?
SYSTem:COMMunicate:SERial:BAUD?
Sets or queries the baud rate of the front panel RS-232 port. The baud rate is the
data transfer rate in bits per second for a serial transfer. Both transmit and receive
baud rates are set by this command. Refer to the TVS600 & TVS600A Series
Waveform Analyzers User Manual for the factory setting.
data transfer rate in bits per second for a serial transfer. Both transmit and receive
baud rates are set by this command. Refer to the TVS600 & TVS600A Series
Waveform Analyzers User Manual for the factory setting.
When you set :SERial:BAUD, the new value is stored in nonvolatile RAM and
is recalled at power up. However, the baud rate is not saved with stored settings
(*LRN) and it is not reset to a default value by *RST.
is recalled at power up. However, the baud rate is not saved with stored settings
(*LRN) and it is not reset to a default value by *RST.
SYSTem:COMMunicate:SERial:BAUD <baud_rate>
SYSTem:COMMunicate:SERial:BAUD?
<baud_rate>
Query response
<NRf >
300
600
1200
2400
4800
9600
19200
38400
300
600
1200
2400
4800
9600
19200
38400
1
57600
1
MINimum
MAXimum
MAXimum
<NR1>
300
600
1200
2400
4800
9600
19200
38400
300
600
1200
2400
4800
9600
19200
38400
1
57600
1
300
19200 (57600
19200 (57600
1
)
1
TVS600A only
Not applicable
Execution Error –222, “Data out of range”
Attempted to set the baud rate to an illegal value.
Attempted to set the baud rate to an illegal value.
None
Command:
SYST:COMM:SER:BAUD 4800
Query:
SYST:COMM:SER:BAUD?
Response:
4800
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples