Tektronix TVS600 & TVS600A Series Manuel D’Utilisation

TRIGger:B Subsystem

TVS600 & TVS600A Command Reference

Sets or queries the state of the 50 kHz, low-pass filter for the B trigger circuit.
Components of the trigger signal above 50 kHz are attenuated when the LPASs
filter is on. It may only be used when DC coupled and with TRIGger:SOURce
set to INTernal. Only one trigger filter (i.e., LPAS, HPAS, or NREJ) may be
enabled at a time.

The INPut:FILTer is separate from the trigger filter and is located before the
trigger pickoff in the signal path.

TRIGger:B:FILTer[:LPASs][:STATe] <boolean>

TRIGger:B:FILTer[:LPASs][:STATe]?

<NRf >
1 or ON
0 or OFF

<NR1>
1
0

0

None

Enabling the low pass filter will set TRIGger:B:COUPling to DC and set
TRIGger:B:FILTer:NREJect to OFF.

When TRIGger:A:SOURce and TRIGger:B:SOURce are set to the same signal,
changing LPAS for one will change LPAS for the other.

Command:

TRIG:B:FILT ON

Query:

TRIG:B:FILT?

Response:

1

TRIGger:B:COUPling
TRIGger:B:FILTer:HPASs
INPut:FILTer