Tektronix TVS600 & TVS600A Series Manuel D’Utilisation

TRIGger:PULSe Subsystem

TVS600 & TVS600A Command Reference

Sets or queries the class of pulse triggering to use for the next acquisition. The
trigger classes are as follows:

 GLITch — the trigger event occurs when the instrument detects a pulse that

is either narrower or wider than a specified duration or width.

 TIMEout —the trigger event occurs when the pulse width timer expires on

pulses wider than the specified duration

 WIDTh — the trigger event occurs when the instrument detects a pulse that

is either inside or outside a specified duration or width.

This command has effect only when you set TRIGger:TYPE to PULSe. The
defined alias for the SCPI trigger :SEQuence[1] is A.

TRIGger[:A]:PULSe:CLASs <pulse_class>

TRIGger[:A]:PULSe:CLASs?

GLITch
TIMEout

WIDTh

GLIT
TIME
WIDT

GLITch

Execution Error –224, “Illegal parameter value”
Attempted to set class to an illegal value.

None

Command:

TRIG:PULS:CLAS WIDTH

Query:

TRIG:PULS:CLAS?

Response:

WIDT

TRIGger:TYPE