Tektronix TVS600 & TVS600A Series Manuel D’Utilisation

TRIGger:TRANsition Subsystem

TVS600 & TVS600A Command Reference

Sets or queries the high threshold for transition triggering.

:A is a predefined alias for :SEQuence[1].

The minimum and maximum values for threshold are VOLT:RANG:OFFS +/–
VOLT:RANG:PTP (in VOLT:RANG:PTP * 0.002 steps).

This command only has effect when TRIGger:TYPE is TRANsition.

TRIGger[:A]:TRANsition:THReshold:HIGH <level>

TRIGger[:A]:TRANsition:THReshold:HIGH?

<NRf>

MINimum
MAXimum

<NR3>

<See comments>
<See comments>

V (default), MV, or UV

0.0E+0

Execution Error –222, “Data out of range”
Attempted to set threshold to an illegal value.

None

Command:

TRIG:TRAN:THR:HIGH 1.0

Query:

TRIG:TRAN:THR:HIGH?

Response:

1.0E+0

TRIGger:TYPE
TRIGger:TRANsition:THReshold:LOW