Emerson CL-RSC Manuel D’Utilisation
3
EMERSON CONTROL LINK CPC® P/N818-2050 CONTROLLER: ADVANCED PARAMETERS & ALARMS
Advanced Parameters
General parameters are used to change
higher-level parameters not directly related to
system operations.
system operations.
Selecting and changing advanced parame-
ters works the same way as general parame-
ters, except that they are accessed in a dif-
ferent way and require entering a different
password.
ters, except that they are accessed in a dif-
ferent way and require entering a different
password.
Before Changing Advanced Parameters
Before changing parameters, clear any ac-
tive alarms by pressing the Alarm Silence
button.
button.
Changing Advanced Parameters
Do not lightly press buttons! You MUST
use considerable force while pressing
controller buttons or your commands will
not register!
controller buttons or your commands will
not register!
Press and hold the UP and DOWN buttons
simultaneously for five seconds to enter the
Advance Programming Mode. The display
will show
Advance Programming Mode. The display
will show
APAS
.
Press (SET) and use the arrow keys to select
the correct password (default is 0000), and
press (SET) to enter it.
press (SET) to enter it.
Installation Photos
See next page for installation photos of Emerson Control Link CPC® P/N 818-2050 Refrigeration Controller.
Note: Exact location may vary depending upon model and features.