Topcon GPT-2005 Manuel D’Utilisation

   6 SPECIAL MODE (Menu Mode)

6-19

If no key operation is given or no process of measurement is performed for more than 30 minutes ( No 
change exceeding 30” has occurred during horizontal angle or vertical angle measurement.), the power 
turns off automatically.  If the instrument is set at distance measurement mode ( No change in distance 
exceeding 10cm has occurred during distance measurement), the mode changes to angle 
measurement automatically in case that the instrument does not operate for approximately 10 minutes, 
and the power turns off after 20 minutes.

Press the [F1] key and press the [F4](ENTER) key.

[F1]
[F4]

●

To return to previous mode, press the [ESC] key.

After pressing the [MENU] key, press the [F4](P

↓

) 

key twice to get the menu on page 3.

[MENU]

[F4]
[F4]

Press the [F1] key.

[F1]

Press the [F2] key.
The data previously set is shown.

[F2]

Press the [F1](ON) key or [F2](OFF) key, and 
press the [F4](ENTER)  key.

[F1] or [F2]

[F4]

  

  

↓

  

↓