Topcon GPT-2005 Manuel D’Utilisation

   6 SPECIAL MODE (Menu Mode)

6-20

(GPT-2009 has vertical angle tilt correction only.)
In case the instrument is used in an unstable situation, constant indexing of vertical and horizontal 
angle may be impossible. In this case, the function of tilt correction can be stopped by selecting TILT 
OFF. It has been set to X,Y (V/H) TILT ON at the factory. 

●

This setting is  memorized after powering off.

Setting ON/OFF for error correction of collimation and horizontal axis for angle measurement.
Note: Perform this item after complete Section 17.5 “Adjustment of Compensation Systematic Error of 
Instrument”. .

After pressing the [MENU] key, press the [F4](P

↓

) 

key twice to get the menu on page 3.

[MENU]

[F4]
[F4]

Press the [F1] key.

[F1]

Press the [F3] key.
The data previously set is shown.
If already ON, the display shows tilt correction 
value.

[F3]

Press the [F1](X-ON) key or [F2](XY-ON) or 
[F3](OFF) key, and press the [F4](ENTER) key.

[F1]~[F3]

[F4]

After pressing the [MENU] key, press the [F4](P

↓

) 

key twice to get the menu on page 2.

[MENU]

[F4]
[F4]

Press the [F1] key.

[F1]

Press the [F4] key.

[F4]

Press the [F1] key.
The data previously set is shown.

[F1]

Press the [F1](ON) key or [F2](OFF) key, and 
press the [F4](ENTER) key.

[F1] or [F2]

[F4]

  

↓

  

↓

  

  

↓

  

↓

  

↓