Watlow Electric 986m987 Manuel D’Utilisation
4.46
WATLOW Series 988 User’s Manual
Setup Menus, Chapter 4
Setup-Comm
Protocol Type
Select the communications protocol.
• [FULL] selects ANSI X3.28 2.2 - A.3.
• [``on] selects Xon/Xoff.
• [Mod] selects Modbus
[Prot] This prompt appears only on controllers equipped with communi-
cations hardware (98_ _-_ _ _ _-_R_ _, 98_ _-_ _ _ _-_U_ _ or 98_ _-_ _ _ _-
_S_ _).
_S_ _).
Default
↓
[FULL]
[``On]
[mod]
[Prot]
[Prot]
[Prot]
Address
Select an address for the controller. The computer will use this address
when communicating with this controller.
when communicating with this controller.
[Addr] This prompt appears only on controllers equipped with communica-
tions hardware for EIA/TIA-485 and EIA/TIA-422.
tions hardware for EIA/TIA-485 and EIA/TIA-422.
If
Default
↓
↓
[`485]
[```0]
…
[``31]
[IntF]
[Addr]
[Addr]
[`422]
[```0]
…
[```9]
[Intf]
[Addr]
[Addr]
[Mod]
[```0]
…
[```1]
…
[`247]
[Intf]
[Addr]
[Addr]
[Addr]
[Prot]
[Addr]