Manualsbrain.com
  1. Manuels
  2. Marques
  3. Panasonic
  4. PAN4570
  5. Manuel D’Utilisation

Panasonic PAN4570 Manuel D’Utilisation

Télécharger
Page de 20
CLASSIFICATION 
Einstufung 
 
No. 
DS-Eval4570-2400 
REV. 
C 
SUBJECT 
Thema 
EvalBoard PAN4570 
 
PAGE 
Seite 
 
10  of  20 
CUSTOMER’S CODE 
EvalPAN4570 
PANASONIC’S CODE 
 
DATE 
Datum 
 
06.11.2006 
 
 
European Technology Center 
Panasonic Electronic Devices (EUROPE) GmbH 
APPROVED 
genehmigt 
CHECKED 
geprüft 
DESIGNED 
Erstellt 
 
8.3.   SELECTING THE HARDWARE PLATFORM 
 
The EmberZNet stack uses a Ember
TM
 platform (Ember
TM
 breakout board and RCM  
module), which   is defined in a BOARD_HEADER file. This file is named dev0455.h  and 
located in the folder 
 ….\Ember\EmberZNet2.5.0\hal\micro\xap2b\em250\board\  
 
IMPORTANT:
 Because the use and settings of GPIOs on the PAN4570 testboard is 
different another BOARD_HEADER file is required.  
 
After installation of EmberZNet2.5.0 the required change of the BOARD_HEADER file 
can be done as follows: 
 
Rename the dev0455.h extracted with EmberZNet for example in dev0455_ember.h 
Copy the PAN4570.h file from the cd to the location where dev0455.h was located 
Rename the PAN4570.h file to dev0455.h 
 
PAN4570.h enables D11, D14, SW2 and SW6 connected to PAN4570 for the use of 
the “simple-lighting” sample application. 
 
The two switches and two LEDs are used as follows: 
 
board LED 
GPIO 
Ember
TM
 name 
function 
LIGHT D11 
3 
HEARTBEAT_LED 
heartbeat 
LIGHT D14 
12  LIGHT 
LIGHT 
LIGHT 
SW2 
15 
BUTTON 1 
LIGHT ON and networking 
LIGHT 
SW6 
8 
BUTTON 0 
LIGHT OFF and networking 
SWITCH 
SW2 
15 
BUTTON 1 
LIGHT ON 
SWITCH 
SW6 
8 
BUTTON 0 
LIGHT OFF 
         (Table 
4) 
For custom applications 5 buttons and 4 LEDs are available on the testboard, the 
carrierboard/testboard schematics in part 10 show their connections to the GPIOs. 
Changes regarding the GPIOs should always be done only in the BOARD_HEADER file.