3M eg3 Manuel D’Utilisation
Overview of running a study
Setting contrast on dosimeter
053-644, Rev E
Page 36
eg4 & eg3
36
Contrast
1. Ensure the meter is Off.
2. Turn the meter on by pressing the on/off/enter button.
3. When the splash screen appears, press and hold the run/stop and on/off enter
buttons. (See figure 4-5 for splash screen).
4. The Setup menu appears on the Edge. Repeatedly press the arrow key until the Contrast
symbol is selected.
NOTE: Setup menu is used to reset the dosimeter, change the contrast, and return to the
main view.
Figure 4-7: Changing the contrast from the keypad
5. Next press the on/off enter button.
6. A number will appear on your display (i.e., 50). Press the up or down arrow to increase or
decrease the contrast of the Edge.
7. Press on/off enter button to accept the new contrast value.
8. To return to the measurement view screen, press the down arrow and press the
on/off/enter button.
Checkmark icon
Is the selection to
exit the setup menu
Is the selection to
exit the setup menu
Contrast icon
Arrows and enter key
Indicates the valid keys
are selected
Indicates the valid keys
are selected