DELL R730xd Manuel D’Utilisation
Steps
1.
1.
Slide in and align the vFlash media unit with the vFlash media slot on the back of the chassis.
2. Connect the cable to the vFlash media unit.
3. Replace the screw securing the vFlash media unit to the chassis.
3. Replace the screw securing the vFlash media unit to the chassis.
Next steps
Follow the procedure listed in
Follow the procedure listed in
.
Control panel assembly
Removing the control panel (R730)
Prerequisites
1.
2.
3.
Keep the #2 Phillips screwdriver handy.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
1.
Using a #2 Phillips screwdriver, remove the screw(s) securing the control panel to the chassis.
CAUTION: Do not use excessive force when removing the control panel as it can damage the
connectors.
connectors.
2. From inside the system, push the control panel out of the chassis.
3. Remove all the cables connecting the control panel to the chassis.
3. Remove all the cables connecting the control panel to the chassis.
171