Regency IG34-NG Manuel D’Utilisation

Regency IG34 Gas Inbuilt Fireplace

Plinth Trim Kits are an option that can be used to fi nish off  the installation when the bottom of the fi replace is higher than the 
hearth or to raise the fi replace.    

 

 

 

            1)    Lay the faceplate side panels fl at, face down on something soft so they don't scratch.  

                                     
                           2)    Attach the Plinth Trim to the bottom of the faceplate side panels with the screws provided.  

 

           3)    Install faceplate on unit - see next page.

1)  Lay the faceplate panels fl at, face down on something soft so they don't scratch.

2)  Take the top faceplate and align the holes in it with the holes in the side panels. 
       Secure with provided nuts and bolts.

1)  Hook the screen over the top of the door frame - lower until     
    screen is fl ush with the door frame.

2) Flip door frame and screen over -  locate the bracket tab at  
    the bottom of the door frame - fold the tab over 90º to secure
    the screen in place.

3) Install screen and door frame on to unit - follow directions   
    on next page.

IG34 Faceplate Assembly / Plinth

1

336-914

Faceplate / Trim Kit

1

366-942

Plinth Kit (optional)

1

336-016

Mesh Screen Door

1

336-072F

Mesh Bottom Screen

6

904-576

#8 Phillips pan head screws

1

336-012

Bottom Door