Regency IG34-NG Manuel D’Utilisation

Regency IG34 Gas Inbuilt Fireplace

Note:  Ensure that the fl anges on the sides of the fi rebox 
           are on the outside, when installing the faceplate 
           (see below).

3)  Fold down the 2 hinges on the bottom frame to a fl at 
     position.
     The bottom frame is installed with a friction fi t - the 
     opening in the corner of each hinge slides over the 
      metal  lip located on the fl oor of the unit.
  
    Note:  Ensure the bottom frame is positioned properly 

    before installing, by making sure there is equal spacing on 

    either side.

1)  Position faceplate on unit lining up screw holes on
    faceplate with screw holes on unit - secure with 4 screws.

2)  Install lower screw below glass door - secure with 4 screws.

4)  Push both bottom frame hinges down on the metal lip until            

      they are fully seated.

5)  Flip bottom louver up to close.

6)  Install the door frame by hooking the top fl ange over the 
     top of the  glass door.

7)  Lower the door frame gently into place.

8)  To uninstall - reverse procedure.

Completed Faceplate & Door Frame Installation 

with Safety Screen