VTech IS6100 Manuel D’Utilisation

6

Once you have installed the handset battery, the screen indicates the 

battery status (see the table below). If necessary, place the handset in the 

telephone base or charger to charge the battery. For best performance, keep 

the handset in the telephone base or charger when not in use. The handset 

battery is fully charged after 16 hours of continuous charging. See the table on 

page 61 for battery operating times.
If the screen is blank or displays 

Place in charger, you need to charge 

the handset without interruption for at least 30

 minutes to give the handset 

enough charge to use the telephone for a short time. When the battery is low, 

the handset displays 

Low battery along with a flashing   icon. If you are on a 

call in low battery mode, the handset plays short beeps to alert you.

The following table summarizes the battery charge indicators and actions  

to take.

Battery indicators

Battery status

Action

The screen is blank, or 

displays 

Place in charger 

and 

 flashes

.

Battery has very little or 

no charge. The handset 

cannot be used.

Charge without interruption 

(at least 30 minutes).

The screen displays  

Low battery and   flashes.

Battery has enough 

charge to be used for a 

short time.

Charge without interruption 

(about 30 minutes).

The screen displays 

hANDSET X.

Battery is charged.

To keep the battery charged, 

place it in the telephone 

base or charger when not 

in use.

If you place the handset in the telephone base or charger without plugging in the 

battery, the screen displays 

No battery.