VTech IS6100 Manuel D’Utilisation

63

The handsets and headset provided with your telephone system are already 

registered. Each handset is assigned a number that displays on the handset. 

Additional handsets registered to the telephone system are assigned in 

sequential order. For instance, if the telephone system already has  

hANDSET 1 and hANDSET 2, the new registered handset is assigned 

hANDSET 3. This telephone system accommodates up to five handsets, or 

four handsets and one headset.

You can add new handsets (

LS6305, purchased separately) to your telephone 

system. Each handset must be registered with the telephone base before 

use. When first purchased, each handset displays 

4sec and 2.Then press # on handset alternately. You may need to charge 

the handset before registering it to the telephone base. For more details on 

battery charging, see page 6.

Place the non-registered handset in the telephone base or charger. If 

1.Press FIND hS on base 4sec and 2.Then press # on handset do not 

appear alternately on the handset screen after a few seconds, remove the 

handset and place it in the telephone base or charger again.
On the telephone base, press and hold 

/FIND hANDSET 

for about four seconds until the red 

IN USE light on the 

telephone base turns on.
Remove the handset from the telephone base or    

charger and then press 

# (pound key). It displays  

Registering...Please wait. It takes about 60 seconds  

to complete the registration. The handset displays  

hANDSET X Registered and you hear a beep when  

the registration process completes.

If the registration fails, the handset displays 

failed for a few seconds, then 1.Press FIND hS on base 

4sec and 2.Then press # on handset alternately. To reset 

the handset, remove it from the telephone base or charger 

and place it back in. Try the registration process again.

1.

2.

3.

You cannot register a handset if any other system handset or headset is  

in use.