3com WX2200 3CRWX220095A Manuel D’Utilisation

C

HAPTER

 11: M

ANAGED

 A

CCESS

 P

OINT

 C

OMMANDS

If local switching is enabled on an MAP, but no VLAN profile is 
configured, then a default VLAN profile is used. The default VLAN profile 
includes a single VLAN named default that is not tagged.

 — 

The following command enables local switching for MAP 

7:

WX# set ap 7 local-switching mode enable

success: change accepted.

„

„

Applies a specified VLAN profile to an MAP to use with local switching.

Syntax — 

set ap ap-number local-switching vlan-profile 

„

— Index value that identifies the MAP on the WX. 

„

— The name of a VLAN profile configured on the WX. 

 — 

If local switching is enabled on an MAP, but no VLAN 

profile isconfigured, then a default VLAN profile is used. The default 
VLAN profile 

includes a single VLAN named default that is not tagged.

 — 

Enabled.

 —

Introduced in MSS Version 6.0.

 —

A VLAN profile consists of a list of VLANs and tags. When a 

VLAN 

profile is applied to an MAP, traffic for the VLANs specified in the 

VLAN profile is locally switched by the MAP instead of being tunneled 
back to an WX.

When applying a VLAN profile causes traffic that had been tunneled to an 
WX to be locally switched by MAPs, or vice-versa, the sessions of clients 
associated with the MAPs where the VLAN profile is applied are 
terminated, and the clients must re-associate with the MAPs.