3com WX2200 3CRWX220095A Manuel D’Utilisation
set ap name
381
Examples
—
The following command specifies that MAP 7 use VLAN
profile locals:
WX# set ap 7 local-switching vlan-profile locals
success: change accepted.
See Also
set ap name
Changes a MAP name.
Syntax —
set ap ap number name name
ap
ap-number
— Index value that identifies the MAP on the WX.
name
— Alphanumeric string of up to 16 characters, with no spaces.
Defaults — The default name of a directly attached MAP is based on the
port number of the MAP access port attached to the MAP. For example,
the default name for a MAP on MAP access port 1 is MAP01.
port number of the MAP access port attached to the MAP. For example,
the default name for a MAP on MAP access port 1 is MAP01.
Access — Enabled.
History —Introduced in MSS Version 3.0. Default Distributed MAP name
changed from DMPnum to DAPnum in MSS Version 4.1. Version 6.0
removed the dap option.
changed from DMPnum to DAPnum in MSS Version 4.1. Version 6.0
removed the dap option.
Examples — The following command changes the name of the MAP on
port 1 to techpubs:
port 1 to techpubs:
WX1200# set ap 1 name techpubs
success: change accepted.
See Also