Leica 1000Z01 Manuel D’Utilisation

TPS-System 1000 Programs-2.3.1en

© Leica

The effects of the fixed keys and of a few function keys are
the same as their effects in "MEASURE AND RECORD".
These keys are generally omitted from the descriptions
of the applications and from the ON-LINE help.

Continues sequence after input, measurements etc. have
been concluded. If the measurement dialog is concluded
with 

  the measurement data will not be recorded.

Erases incorrect alphanumeric input.

If the reflector cannot be set up directly over the
desired point, or if the point cannot be seen from the
instrument, the function 'OFFS' may be used to make an
offset measurement.

Previous to the input of the values for eccentricity, a
distance must be measured to the reflector.

For more information, please refer to section
'Measurement & recording' of 'System'-user manual.

Records in a pre-established format manually-entered
coordinates, measurements or the results of
calculations.

Quits current dialog and calls up previous dialog.
Changes and inputs to dialog are rejected and are not
stored.

Displays the second level of the function keys 

 -

 .

Calls ON-LINE help.

Closes application.

Calls up code input or code function in measurement
dialog.