Leica 1000Z01 Manuel D’Utilisation
© Leica
TPS-System 1000 Programs-2.3.1en
27
OH
This manual describes the "Orientation and Height
Transfer" program of the TPS SYSTEM 1000
theodolite series.
Transfer" program of the TPS SYSTEM 1000
theodolite series.
The instrument must be set up on a known point. The
program "ORIENTATION" calculates an angular
correction for the instruments horizontal circle, so that
0.0000 of the horizontal circle corresponds with grid
north (Orientation correction), using reference points
with known Easting and Northing.
program "ORIENTATION" calculates an angular
correction for the instruments horizontal circle, so that
0.0000 of the horizontal circle corresponds with grid
north (Orientation correction), using reference points
with known Easting and Northing.
For simultaneous determination of the station elevation,
height of instrument and height of reflector must
already have been input and the elevation of the target
points must be known.
height of instrument and height of reflector must
already have been input and the elevation of the target
points must be known.
The program handles a maximum of 10 points.
Orientation and Height Transfer
Introduction
E
0°00'00"
H
N
PROG_Z01
E
0
N
0
H
0
E
N
H
H
z
∆
H