Leica 1000Z01 Manuel D’Utilisation

© Leica

TPS-System 1000 Programs-2.3.1en

: Sequence number of the current point

and total number of points in the
measurement set. The scroll bar shows
the sequential position of the
measurements, graphically.

: Use this measurement for height

determination (YES/NO)

: Use this measurement for calculation

(ON/OFF).

: The target point number.

: Identified erroneous measurements.

Possible values are:
NONE

measurement is OK

HZ

horizontal angle error

DIST

distance error

HT

height difference error

The flags may also be combined, i.e.
DIST + HZ

∆∆∆∆∆

: Difference between calculated and

measured horizontal angle

∆∆∆∆∆

: Difference between calculated and

measured distance

∆∆∆∆∆

 Height

: Difference between calculated and

measured height

: Reflector height used for the target

point

Easting, Northing, Elevation: Target coordinates used.

Recalculate the result.

Scroll to the measurements of the previous point.

Scroll to the measurements of the following point.

Measure more points. Return to the dialog  "Target
Point".

Delete a point from the set of measurements. You can
now measure a new point in its place.

Exit the program.