M-AUDIO 99004139310 Manuel D’Utilisation
Oxygen Series
User Guide
4
Control Assign, Data 1, Data 2, Data 3
The Control Assign function (CTRL ASGN) assigns a MIDI continuous control number (MIDI CC), or other MIDI
parameter from the table in Appendix B to the selected Knob, Button, Slider, or to the Sustain Pedal jack. The Data 1,
Data 2, and Data 3 keys define various related aspects of the parameter or function assigned to a control.
parameter from the table in Appendix B to the selected Knob, Button, Slider, or to the Sustain Pedal jack. The Data 1,
Data 2, and Data 3 keys define various related aspects of the parameter or function assigned to a control.
For example, it is possible to configure a Button to send MIDI note On/Off Data by assigning it to controller number
147. The Data 1 key is used to specify the pitch (or note number) of the MIDI note for the button (see Appendix C). The
Data 2 key is used to set the Note Off velocity (Velocity Off), and the Data 3 key is used to set the Note On velocity
(Velocity On), determining how loud the note will sound.
147. The Data 1 key is used to specify the pitch (or note number) of the MIDI note for the button (see Appendix C). The
Data 2 key is used to set the Note Off velocity (Velocity Off), and the Data 3 key is used to set the Note On velocity
(Velocity On), determining how loud the note will sound.
Please refer to Section 9 - Advanced Programming Functions, for more details and step-by-step control assignment
examples for different purposes.
examples for different purposes.
Channel Assign
The Channel Assign function (CHAN ASGN) assigns a Knob, Slider, Button or the Sustain Pedal jack to a specific MIDI
channel.
channel.
1.
Select the control as described earlier in this guide.
2.
Press the Advanced button
3.
Press the Channel Assign key - the LED display will show the currently assigned MIDI channel for the active
control (for example
control (for example
"c.0.2.")
4.
Enter the new MIDI channel number using the number keys
5.
Press the Enter key
When assigned to channel
"0", the control (Knob, Slider, Button or Sustain Pedal jack) will transmit on the Global MIDI
Channel. See the next section,
"Global Channel" for more information.
NOTE: When a control is assigned to send SysEx messages, the displayed number represents the SysEx Device ID
instead of the MIDI transmit channel number. Please refer to Section 10 - MIDI Messages Defined for more
information about SysEx messages, and Appendix B for a complete list of assignable SysEx messages.
instead of the MIDI transmit channel number. Please refer to Section 10 - MIDI Messages Defined for more
information about SysEx messages, and Appendix B for a complete list of assignable SysEx messages.
Global Channel
The Global Channel function (GLOBAL CHAN) sets the default MIDI channel for the keyboard and all MIDI controls,
except for those that have a specific MIDI channel assigned to them.
except for those that have a specific MIDI channel assigned to them.
1.
Press the Advanced button
2.
Press the Global Channel key - The LED display will show the current Global channel. For example if channel 1
is the current Global channel, it will appear as
is the current Global channel, it will appear as
"c.0.1."
3.
Enter the new channel number using the number keys
4.
Press the Enter key
The Global Channel can also be changed by using the following method:
1.
Press the Select button until the lower edge of the LED displays a red dot above
"GLOBAL"
2.
Scroll through the MIDI channels using the
"
-
" or "+" buttons to select the new channel number