Philips LFF6080/GBB Manuel D’Utilisation

- 18 -

The manual input tray allows you to use various paper 
formats with greater grammage than the one used in the 
paper feed cassette (refer to the paragraph 
Specifications, page 91).

Only one sheet or envelope can be fed at a time.

1 Spread the manual feed guides to the maximum.

2 Insert a sheet or an envelope in the manual input 

tray.

3 Adjust the paper guides against the right and left 

edges of the sheet or the envelope.

4 Print making sure that the chosen paper format 

corresponds to the selected format on the printer 
(refer to Copy, page 19).

• Feeding can be done only through the manual feed.
• Recommended area should be the area which 

excludes 15 mm from the leading edge, 10 mm from 
both the left and right edges, and the rear edge.

• A few lines may be given in solid print at the part of 

being overlapped.

• Envelopes which are not recommended may lead to 

improper printing (refer to the paragraph 
Specifications, page 91).

• Curled envelope after printing should be fixed 

manually.

• Small crumples on the edge of the wide side of 

envelopes, smearing, or less clear printing may 
appear on the reverse side.

• Set envelope by pressing the folding line of four edges 

properly after releasing air inside.

• Set envelope in a proper position after aligning in case 

it is bent or warped.

• Paper conditioning is not allowed. And it should be 

used under normal office environment.

Before inserting paper, refer to the 
paragraph Paper 
recommendations, page 10.