Philips LFF6080/GBB Manuel D’Utilisation
LFF6080
- 48 -
2718 - SETUP / LAN ETHER / PARAMETERS /
WINS SRV. 1
2719 - SETUP / LAN ETHER / PARAMETERS /
WINS SRV. 2
1 Enter the IP address of each server, and press OK
to confirm.
Connection to a domain (for instance with
Windows NT, 2000 or XP)
Windows NT, 2000 or XP)
The machine can identify itself on the local network by
using the parameters of a user account, before it can,
among others, archive documents by means of the Scan
to Disk function.
using the parameters of a user account, before it can,
among others, archive documents by means of the Scan
to Disk function.
Once these parameters have been filled in, they will be
used by default, if you do not declare a user name and
password when using the function.
used by default, if you do not declare a user name and
password when using the function.
Domain Login user name
2721 - SETUP / LAN ETHER / DOM. LOGIN / USER
1 Enter the user name for login on the local network,
then validate with OK.
Domain Login password
2722 - SETUP / LAN ETHER / DOM. LOGIN /
PASSWORD
1 Enter the password for login on the local network,
then validate with OK.
Domain name
2723- SETUP / LAN ETHER / DOM. LOGIN / DOM.
NAME
1 Enter the domain name of the local network, then
validate with OK.
SNTP server configuration
The machine can automatically update its date and time
when connecting to an SNTP server.
when connecting to an SNTP server.
SNTP server address
2731- SETUP / LAN ETHER / SNTP SERVER /
ADDRESS
1 Enter the name of the SNTP server, then validate
with OK.
This name can be in the form of an IP address, a DNS
address or a NetBIOS name.
address or a NetBIOS name.
SNTP server port
2732- SETUP / LAN ETHER / SNTP SERVER /
PORT
1 Enter the server port number, then validate
with OK.
The port by default is port 123.
Activating the server access
2733- SETUP / LAN ETHER / SNTP SERVER /
STATE
1 With or , select ON to activate the SNTP
server then validate with OK.
Time zone
2734- SETUP / LAN ETHER / SNTP SERVER / TIME
ZONE
1 With or , select the time zone where the
terminal is located then validate with OK.
If you have activated the automatic summer time
management, the TIME ZONE setting is initialised
automatically (see Summer time / Winter time setting,
page 31).
management, the TIME ZONE setting is initialised
automatically (see Summer time / Winter time setting,
page 31).
Summer time
2735- SETUP / LAN ETHER / SNTP SERVER /
SUMMER TIME
1 With or , select the appropriate time setting,
WINTER TIME, SUMMER TIME +1 or SUMMER
TIME +2, then validate with OK.
TIME +2, then validate with OK.
Note
If the terminal is set up in Automatic
configuration mode (menu 2711),
these addresses can be filled in
automatically by certain DHCP
servers.
configuration mode (menu 2711),
these addresses can be filled in
automatically by certain DHCP
servers.
Note
This menu is not displayed if the menu
AUTO ADJUST is activated (see
Summer time / Winter time setting,
page 31).
AUTO ADJUST is activated (see
Summer time / Winter time setting,
page 31).