TallyGenicom 2440 Mode D'Emploi

2-31

Using the tractor as pull tractor

By default the tractor of your printer is mounted at the rear and works as push tractor.

You can use the tractor as pull tractor also. Because the paperway is more straight in pull 
mode this may be useful if you want to print critical paper types.

This section describes how to remove the push tractor and install it as pull tractor.

Oben the printer cover.

Slightly press the single sheet feeder to 
the right or to the left, until the holding 
pin comes free from its recess. Remove 
the feeder.

Press the two hooks 

 and remove 

cover 

.

Press the two levers 

 upward and 

remove the tractor.