TallyGenicom 2440 Guida Utente
Operating the printer
Paper handling
2-31
Using the tractor as pull tractor
By default the tractor of your printer is mounted at the rear and works as push tractor.
You can use the tractor as pull tractor also. Because the paperway is more straight in pull
mode this may be useful if you want to print critical paper types.
mode this may be useful if you want to print critical paper types.
This section describes how to remove the push tractor and install it as pull tractor.
1
Oben the printer cover.
2
Slightly press the single sheet feeder to
the right or to the left, until the holding
pin comes free from its recess. Remove
the feeder.
the right or to the left, until the holding
pin comes free from its recess. Remove
the feeder.
3
Press the two hooks
A
and remove
cover
B
.
4
Press the two levers
C
upward and
remove the tractor.
A
B
C
C