Toshiba 50hp82 Manuel Du Propriétaire

42

Use this procedure to set the number of vertical lines of
the input high definition image to 1035 or 1080.

Example: Setting the “1080B” mode to “1035I”

1. Use the ▲ and ▼ buttons to select “OPTIONS,” then

press the PROCEED button.
The “OPTIONS” screen appears.

2. Use the ▲ and ▼ buttons to select “HD SELECT.”

3. To set the HD SELECT mode to “1035I” ...

Use the 

 and 

 buttons to select “1035I.”

The mode switches as follows each time the 

 or 

button is pressed:

→

↔

↔

←

4. Once the setting is completed ...

Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once
more.

These 3 modes are not displayed in correct image
automatically.

1080B

............... Standard digital broadcasts

1035I ...............

Japanese “High Vision” signal format

1080A

............... Special Digital broadcasts

Use this procedure to switch the setting to “ON” or “OFF.”

Example: Setting the “ON” mode to “OFF”

1. Use the ▲ and ▼ buttons to select “OPTIONS,” then

press the PROCEED button.
The “OPTIONS” screen appears.

2. Use the ▲ and ▼ buttons to select “PICTURE SIZE.”

3. To set PICTURE SIZE mode to “OFF”...

Use the 

 and 

 buttons to select “OFF.”

The mode switches as follows when the 

 or 

 buttons

are pressed:

↔

4. Once the setting is completed ...

Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once
more.

ON ..................... For RGB Input: “NORMAL” and

“FULL” can be selected for Wide-
Screen switching.

OFF ................... For RGB Input: “TRUE” and

“FULL” can be selected for Wide-
Screen switching.

Select  “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.