Toshiba 50hp82 Manuel Du Propriétaire

40

Setting the AUDIO 1, 2, and 3 connectors to the desired
input.

Example: Setting “AUDIO 1” to “VIDEO 2”

1. Use the ▲ and ▼ buttons to select “OPTIONS,” then

press the PROCEED button.
The “OPTIONS” screen appears.

2. Use the ▲ and ▼ buttons to select “AUDIO1.”

3. To set the AUDIO1 to “VIDEO2”...

Use the 

 and 

 buttons to select “VIDEO2.”

The mode switches as follows each time the 

 or 

button is pressed:

→

↔

↔

↔

↔

↔

↔

←

4. Once the setting is completed...

Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once
more.

A single audio input cannot be selected as the audio
channel for more than one input terminal.

Select  “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.

RGB ................

Use the 5BNC terminal for RGB
input.

COMP. .............

Use the 3BNC terminal for component
input.

Select  “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.

Select whether to set the input of the 5 BNC connectors to
RGB or component.

Example: Set the BNC SELECT mode to “COMP.”

1. Use the ▲ and ▼ buttons to select “OPTIONS,” then

press the PROCEED button.
The “OPTIONS” screen appears.

2. Use the ▲ and ▼ buttons to select “BNC SELECT.”

3. To set the BNC SELECT mode to “COMP.”...

Use the 

 and 

 buttons to select “COMP.”

The mode switches as follows each time the 

 or 

button is pressed:

→

↔

←

4. Once the setting is completed...

Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once
more.