Mitsubishi wd-52527 Manuel Du Propriétaire

Chapter 1. Television Overview

The buttons on the Front Control Panel highlighted are duplicated on the remote control. The top row of labels shows

the control functions when there are no TV menus displayed on the screen. The bottom row of labels shows the control

functions when the TV menus are displayed on the screen or when a special function has been activated. See “Remote

Control Overview” for further details on the functions of these buttons.

Front Control Panel

Portions of the advanced circuitry of this TV
must continue to operate even when the TV is
turned off. Some of these circuits therefore
may need to be cooled at times during
standby. A low power standby fan may switch
on and be heard in a quiet environment. This
is normal operation.

IMPORTANT

Input 3

This input can be used for convenient connection of a

camcorder or other video device to the TV. Please note

that if you connect to the S-VIDEO terminal, the VIDEO

terminal is deactivated. The VIDEO terminal is active

when there is no S-Video connection.

*/165

47*%&07*%&0- "6%*0 3

DEVICE

GUIDE

CANCEL

ENTER

FORMAT

– CH –

ADJUST

– VOL –

POWER

SYSTEM

RESET

LAMP

STATUS

TIMER

System Reset

If the TV will not respond to either the remote control or the front panel controls and/or will

not power Off, press the SYSTEM RESET button with a pointed item like the end point of a

paperclip. The TV will turn Off and the TIMER light will flash quickly for about one minute.

When the TIMER light stops flashing, you may again turn on the TV. The changes you

made the last time the TV was on before you used the SYSTEM RESET button may be lost,

however, the changes that were previously saved are not lost.