Mitsubishi wd-52527 Manuel Du Propriétaire

Refer to the following tables for explanations of the front-panel indicator lights.

None (indicator off)

TV is powered OFF.

Normal operation.

Green, steady

TV is powered ON.

Normal operation.

Green, rapid blinking 1.  TV just plugged into AC outlet.

Wait until blinking stops before turning on 
(approximately 1 minute).  Normal operation.

2.  AC just restored after power failure. Wait until blinking stops before turning on 

(approximately 1 minute).  Normal operation.

3.  TV Rebooting after System Reset 
used.

Wait until blinking stops before turning on 
(approximately 1-2 minutes).  Normal operation.

4.  TV Rebooting after power 
fluctuation or receiving abnormal 
digital signals from digital channel, 
CableCARD™, or digital device.

Wait until blinking stops before turning on 
(approximately 1 minute).  Normal operation.

5.  You have begun the procedure to 
update software from an authorized 
flash memory device.

For detailed information, see the instructions 
that accompany the authorized software update.  
Important:  Do not use non-authorized software at 
any time.

Green, slow blinking TV powered off and automatic on-

timer is set. 

Normal operation.  TV can be turned on at any time.

None (indicator off)

Normal TV on or standby condition.

Normal operation.

Green, rapid blinking TV just powered off and lamp is 

cooling.

Begins to blink 30 seconds after turning off TV.  TV 
can be turned on before it begins to blink or after the 
blinking stops, but not while the indicator is blinking.  
Normal operation.

Yellow, steady

Lamp nearing end of useful life.

This is a recommendation to have a new lamp ready 
before the current lamp stops illuminating.  See 
Appendix H for ordering information.

Yellow, blinking

1.  Lamp access door is open or not 
secure.

TV will not operate until lamp access door is secure.  
See Appendix H for installation information.

2.  No lamp installed.

TV will not operate without a lamp.  See Appendix H 
for installation information.

Red, steady

Lamp no longer illuminates and has 
reached the end of the lamp life.

Replace the lamp.  The TV will not operate when 
the lamp no longer illuminates.  See Appendix H for 
installation information.

<

DEVICE

GUIDE

CANCEL

MENU

ENTER

MENU

FORMAT

– CH –

<

>

ADJUST

– VOL –

<

>

>

<

>

POWER

SYSTEM

RESET

LAMP

STATUS

TIMER