Mitsubishi wd-52527 Manuel Du Propriétaire

Select the antenna for the channels you want to edit.  You 
can select Ant-1 (main) or Ant-2 (Aux).

When a memorized channel is available with the same 

main channel number in both analog and digital formats, 
a check mark in the Prefer Digital box will allow digital 

channels to display and analog channels to be hidden 
(when using CH    ).  Removing the check mark will 
show both analog and digital choices. 

Channels can be changed in 3 ways:

•  By pressing ADJUST     to select the channel. 

•  By pressing CH     for channels already in memory. 

•  By directly entering the number.  With so many current 

and potential channels, the number range is greatly 
expanded.  Channels can be one part, analog or 
digital (up to the number 16383) or two-part for digital 
channels (these use a separator).  For a two-part 
digital channel, press SUB/CANCEL on the remote 
to enter a separator after the first, second or third 
number, depending on the broadcaster’s channel 
information. 

For digital channels, when the broadcaster has sent a 
virtual channel number, the virtual channel number is 
shown in the text box and the original digital channel is 
shown below on-screen, as a reference.

After the available channels have been memorized 

from the Setup Menu, weaker channels can be added.  
Unwanted channels can also be deleted.  Press CH   or 

 on the remote control to see the channels in memory.  

Press ADJUST   or   to select Added or Deleted for the 
channel shown in the Channel number box.

Analog channels shown on Antenna-1 or Antenna-2 

can be named (up to four characters).  After you enter 
a name, it will appear on the TV screen, next to the 
channel number.

1.   Press ADJUST   or   to select each letter.  

2.  Press ENTER  to set the letter and move to the  

 

next letter position.  

3.  Press CANCEL to move back one position. 

Digital channels are automatically named if the 
broadcaster sends the information.

Note:  Channel names assigned by TV Guide On 
Screen® take priority over names manually entered 
here.