Mitsubishi wd-52527 Manuel Du Propriétaire

1.  Press the SQV button.

2.  To change memory banks, press a number button 

within 5 seconds of pressing the SQV button.

3.  Press the SQV button repeatedly to cycle through the 

channels available in that bank.

1.  Press CH     or number buttons to select the 

channel you want to add to the current SQV memory 
bank.

2  Press ENTER.

3.  Press and hold the SQV button for about 2 seconds.  

When “SQV” and the memory bank number 
appear under the channel number, the channel has 
successfully been added.

1.  Press the SQV button and then the memory bank 

number.

2.  Press the SQV button repeatedly until you see the 

desired channel.

3.  While the channel number and SQV indicator (with 

correct bank number) are still displayed on the screen, 
press the CANCEL button.  If the CANCEL button 
is not pressed before the SQV indicator disappears 
automatically, the channel will not be removed.

4.  When the SQV indicator disappears, the channel 

has successfully been removed only from that bank.  

“Other” banks remain unchanged.

Displays the approximate signal strength of the currently 
tuned digital channel.  Use to adjust the antenna direction 
to optimize signal strength.  The higher the bar, the 
stronger the signal.  Does not apply to analog channels.

You can change the tuned channel while in this menu 

so that you can see the effects of antenna adjustments.  
Highlight the channel box, press CH     or ADJUST     
to display the desired channel number, and press ENTER.

SQV (SuperQuickView™) allows you to put together lists 
of your favorite channels from Antenna 1 and Antenna 
2. You can store channels in any of the 9 different SQV 

memory banks.  You can also store the same channel in 
multiple memory banks.  Once you have added a channel 
to an SQV memory,  “SQV” and the memory bank 
number will appear under the tuned channel number on 
the TV screen.

1.  Select the channel using the “Channel” option box or 

press CH    .

2. Highlight the bank (SQV1-SQV9).

3. Press ENTER to check mark the selected SQV memory 

bank.

4. Repeat for additional channels or banks.

1.  Highlight the box for the SQV bank number.

2. Press ENTER  to remove the check mark.