Mitsubishi ws-48513 Manuel Du Propriétaire

64

65

To view a V-Chip blocked program or to watch the 

program during a scheduled lock time, you must enter 
your 4-digit passcode or change the channel to an 
unlocked program.  Once you have entered the passcode, 
the V-Chip block or Lock by Time will remain released 
until the TV is powered Off and then On again.

V-Chip Lock Menu: Passcode

V-Chip

Select V-Chip Lock to perform the functions listed below.  
V-Chip allows you to Block or Allow programs based upon 

rating signals sent by the broadcaster.  The TV comes 
from the factory with the V-Chip Lock in the Off setting.  

You can turn the V-Chip on within the V-Chip Menu or 

you can use the V-CHIP button on the remote control to 
conveniently turn the V-CHIP on or off.  

The factory preset is TV-PG for TV ratings or PG for movie 

ratings, allowing only programs rated TV-PG/PG or lower.  

You can change the blocking level to various TV ratings 

and lettered categories or movie ratings.  After changing 
channels or devices, there may be up to a 5 second delay 
before the V-Chip lock takes effect.

Entry

You will see the screen shown in Figure 16 when you press 

V-CHIP on the remote control, or the first time you select 

the V-Chip Lock menu, or after you have canceled your 
passcode.  To use the Lock, input a four-digit passcode 
with the number buttons on the remote control, then 
press ENT(er).  You can delete a number and move back 
one space by pressing CANCEL.  You can exit without 
inputting a passcode by pressing MENU or HOME.

After setting a passcode, the V-Chip Lock is active.  The 

next time you select V-Chip Lock you will see “...enter 

your passcode” instead of “...enter a new passcode”.  

������ ������ ����

�� �� �� ��� ����� ����� � ��� ���������

� � � �

��� ��� ������ ������� ��� ����� ������

V-Chip Start Time and V-Chip Stop 

Time

Select the times you would like the V-Chip to be active.  
By setting the V-Chip Start Time and V-Chip Stop Time to 
the same time, the V-Chip will be active 24 hours a day.

Press ADJUST   or    to slowly select the time, starting 
with the hours.  Press and hold ADJUST   or   to 
quickly select the hours, press ADJUST   to select the 
minutes.

If you forget your four-digit Passcode, see 

Appendix A.

������� �� �������

������ ������ ��� ������� ������� ��� ������ ��

����� ����

�� ����� ��� �������� ����� ���� ���������

� � � �

��� ��� ������ ������� ��� ����� ������