Siemens sl785 Mode D'Emploi
12
First steps
Gigaset SL785 / USA en / A31008-M2009-R301-4-6019 / starting.fm / 14.02.2011
V
e
rsion 4, 16.0
9
.2005
To connect the USB cable or change the battery open the battery cover:
¤
Remove the belt clip (if
attached).
attached).
¤
Place a coin into the notch at
the bottom of the casing and
pull the battery cover
upwards.
the bottom of the casing and
pull the battery cover
upwards.
To change the battery, place a
coin in the cavity in the casing
and pull the battery upwards.
coin in the cavity in the casing
and pull the battery upwards.
Attaching/removing the belt clip
The handset has notches on each side to attach the belt clip.
¤
To attach – Press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage the notches.
onto the back of the handset so
that the protrusions on the belt
clip engage the notches.
¤
To remove – Using your right
thumb, apply pressure to the cen-
ter right of the belt clip, push the
fingernail of your left index finger
between the clip and the casing,
and lift the clip upwards.
thumb, apply pressure to the cen-
ter right of the belt clip, push the
fingernail of your left index finger
between the clip and the casing,
and lift the clip upwards.