Siemens sl785 Mode D'Emploi
13
First steps
Gigaset SL785 / USA en / A31008-M2009-R301-4-6019 / starting.fm / 14.02.2011
V
e
rsion 4, 16.0
9
.2005
Placing the handset in the charging cradle
¤
Insert the power adapter of the charging cradle into the electrical outlet.
¤
Place the handset in the charging cradle, with its display facing forward.
The handset is registered with the base station at the factory. You do not need to
complete a registration. To use a different base station or use additional handsets
with your base station, register the devices manually (
complete a registration. To use a different base station or use additional handsets
with your base station, register the devices manually (
To charge the battery, leave the handset in the charging cradle.
First battery charge and discharge
The correct charge status can only be displayed if the battery is first fully charged
and then discharged.
and then discharged.
Please note
u
After the first battery charge and discharge, you can place your handset in
the charging cradle after every call.
the charging cradle after every call.
u
Always repeat the charging and discharging procedure if you remove the
battery from the handset and reinsert it.
battery from the handset and reinsert it.
u
The battery may heat up during charging. This is not dangerous.
¤
Place the handset in the charging cradle for at
least six (6) hours.
least six (6) hours.
¤
Once the battery is fully
charged, remove the hand-
set from the charging cradle
and do not put it back again
until the battery is fully dis-
charged.
charged, remove the hand-
set from the charging cradle
and do not put it back again
until the battery is fully dis-
charged.
6 h