Enterasys csx400 Manuel D’Utilisation

CSX400 and CSX400-DC User’s Guide

143

The SNMP Traps screen, shown in 

, allows the user to configure the CSX400 to send 

traps to as many as eight remote management workstations. SNMP traps are messages about 
network events and device operational statistics. 

Access the SNMP Traps screen from the Setup Menu screen by using the arrow keys to highlight 
the SNMP Traps option and pressing ENTER. The SNMP Traps screen displays.

 

The following definitions explain each of the SNMP Traps screen fields:

Use this field to enter the IP address of the management workstation 

designated to receive SNMP traps from the CSX400.

Use this field to enter the community name of the management 

workstation with the associated IP address. The community name indicates the “access level” of 
traps that will be forwarded to the Trap destination.

SNMP TRAPS

Trap Community Name

Trap Destination

Enable Traps

2012_06

CSX400 Local Management

Flash Image Version: XX.XX.XX