Output Solutions ez-2000plus Mode D'Emploi
5-2. TPH Print Line Adjustment
Please contact your local dealer for
technical support
1.
technical support
1.
Open the top cover.
2.
Pull the Print Head Lever out
and flip it upward to the right.
and flip it upward to the right.
2
1
3.
TPH print line adjustment:
When the printing is stiff or
printing with thick paper, the
print line needs to be moved
forward (paper feed direction)
in order to achieve better
printing quality. Use a flat tip
screwdriver, and turn the
screws (A) clockwise to move
the TPH forward
printing with thick paper, the
print line needs to be moved
forward (paper feed direction)
in order to achieve better
printing quality. Use a flat tip
screwdriver, and turn the
screws (A) clockwise to move
the TPH forward
TPH position adjustment for
the left and right screws (A)
need to be identical to make
sure that the print line and the
roller platen are parallel to
each other.
the left and right screws (A)
need to be identical to make
sure that the print line and the
roller platen are parallel to
each other.
Turning the screws (A) one
circle, the TPH will move
0.5mm. It is recommended to
adjust by a quarter of a circle
each time to fully control the
printing quality and status.
circle, the TPH will move
0.5mm. It is recommended to
adjust by a quarter of a circle
each time to fully control the
printing quality and status.
If the adjustment is failed,
please slowly turn the screws
(A) counterclockwise all the
way to the end using a flat tip
screwdriver. And redo the
adjustment from the beginning.
please slowly turn the screws
(A) counterclockwise all the
way to the end using a flat tip
screwdriver. And redo the
adjustment from the beginning.
A
EZ-2000+/6000+ User’s Manual Rev. D
49