Output Solutions ez-2000plus Mode D'Emploi
5-4. Thermal Print Head Cleaning
Unclear printouts (some parts of label
cannot be printed) may be caused by
dusty print head, ribbon stain, or label
liner glue. Therefore when printing, it’s
necessary to keep the top cover closed.
Also, check and prevent paper/label
from being stained or dusty to ensure
print quality and to prolong the print
head life. Print head cleaning
instructions are as follows:
1.
cannot be printed) may be caused by
dusty print head, ribbon stain, or label
liner glue. Therefore when printing, it’s
necessary to keep the top cover closed.
Also, check and prevent paper/label
from being stained or dusty to ensure
print quality and to prolong the print
head life. Print head cleaning
instructions are as follows:
1.
Power-off the printer.
2.
Open the top cover.
3.
Take out the ribbon.
4.
Open the print head by lifting the
Print Head Lever.
Print Head Lever.
5.
If there are label pieces or other
stain on the print head (see blue
arrow), please use a soft cloth with
industrial use alcohol to wipe away
the stain.
stain on the print head (see blue
arrow), please use a soft cloth with
industrial use alcohol to wipe away
the stain.
【
Note 1
】
Weekly cleaning on the print head is
recommended.
recommended.
【
Note 2
】
When cleaning the print head with soft
cloth, make sure there is no any metal
or hard particles attached on it.
cloth, make sure there is no any metal
or hard particles attached on it.
EZ-2000+/6000+ User’s Manual Rev. D
51