Smeg sta8614xu Mode D'Emploi

Rev 0.0

 17

The dishwasher can to signal a number of malfunctions by turning on various 
indicator lights, as described below (see following table):  

  

Acquastop failure
The anti-fl ooding system has tripped (only for models 
fi tted with this feature). Activates in case of water leaks. 
Contact the technical assistance service.

Safety level
The system limiting the water level in the dishwasher 
has tripped. Interrupt the current program. Switch off 
the dishwasher, switch it back on again, program a new 
cycle and press start. If the problem persists, contact 
the technical assistance service.

Water heating malfunction
The water is not heated or is incorrectly heated. Repeat 
the washing program; if the problem persists, contact 
the technical assistance service.

Water temperature monitoring malfunction
Interrupt the current program. Switch off the dishwasher, 
switch it back on again, program a new cycle and press 
start. If the problem persists, contact the technical 
assistance service.

Water intake malfunction
The appliance does not take in water or does so 
incorrectly. Make sure the water connections are 
correct, that the water supply tap is open and that the 
fi lter is not clogged. If the problem persists, contact the 
technical assistance service.

Tab. 5-01a