Nokia N93 Mode D'Emploi

Page de 127
Tools
108
Copyright © 2006 Nokia. All rights reserved. 
Call barring
 (network service) allows you to restrict the 
calls that you make or receive with the device. To change 
the settings, you need the restriction password from your 
service provider.
Select the desired barring option, and set it on (
Activate
or off (
Cancel
), or check whether the option is active 
(
Check status
). 
Call barring
 affects all calls, including 
data calls.
Call barring and call diverting cannot be active at the 
same time.
When calls are barred, calls may be possible to the official 
emergency number programmed into your device.
Network
Your device can automatically switch between the GSM 
and UMTS networks. The GSM network is indicated with 
 in the standby mode. The UMTS network is indicated 
with .
Network mode
 (shown only if supported by the 
operator)—Select which network to use. If you select 
Dual 
mode
, the device uses the GSM or UMTS network 
automatically, according to the network parameters and 
the roaming agreements between the network operators. 
Contact your network operator for more details.
Operator selection
—Select 
Automatic
 to set the device to 
search for and select one of the available networks, or 
Manual
 to manually select the network from a list of 
networks. If the connection to the manually selected 
network is lost, the device sounds an error tone and asks 
you to reselect a network. The selected network must have 
a roaming agreement with your home network, that is, the 
operator whose SIM card is in your device.
 Glossary: A roaming agreement is an agreement 
between two or more network service providers to 
enable the users of one service provider to use the 
services of other service providers.
Cell info display
—Select 
On
 to set the device to indicate 
when it is used in a cellular network based on microcellular 
network (MCN) technology and to activate cell info 
reception.
Enhanc. sett.
In the standby mode, 
 indicates a compatible headset 
is connected, and  
 that the headset is unavailable, or a 
Bluetooth connection to a headset is lost. 
 indicates a 
compatible loopset is connected and  
 that a 
Text 
phone
 is connected.