Nokia N93 Mode D'Emploi
Tools
109
Copyright © 2006 Nokia. All rights reserved.
Select
Headset
,
Loopset
,
Text phone
,
Bluetooth
handsfree
,
Music stand
, or
Car kit
and from the
following:
Default profile
—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See ‘Profiles—set tones’, p. 95.
device. See ‘Profiles—set tones’, p. 95.
Automatic answer
—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to
ringing type is set to
Beep once
or
Silent
, automatic
answer is disabled. Automatic answer is not available for
Text phone
.
Lights
(for music stand and car kit)—Set whether lights
remain on, or are switched off after the time-out.
If you are using a
Text phone
, you must activate it on your
device. Press
, and select
Tools
>
Settings
>
Enhancement
>
Text phone
>
Use Text phone
>
Yes
.
TV configuration
Press ,
and
select
Tools
>
TV out
. Select from the
following:
TV system
—Select
PAL
for PAL and SECAM TV system
format or
NTSC
for NTSC TV system format.
Ratio
—Select
4:3
or
16:9
.
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 55.
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 55.
To activate enhanced voice commands for starting
applications and profiles, you must open the
applications and profiles, you must open the
Voice cm.
application and its
Profiles
folder. Press
, and select
Tools
>
Voice cm.
>
Profiles
; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold
voice commands, press and hold
in the standby mode,
and say a voice command. The voice command is the name
of the application or profile displayed in the list.
of the application or profile displayed in the list.
To add more applications to the list, select
Options
>
New
application
. To add a second voice command that can be
used to start the application, select
Options
>
Change
command
, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select
Options
>
Playback
.
To change voice command settings, select
Options
>
Settings
. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select
device language, select
Synthesiser
>
Off
. To reset voice