Amana 658030-ak 8" dado set Mode D'Emploi
indicator and magnetic base.
In addition, the table insert (if using a table saw)
must be of the appropriate type for dado sets, the
arbor length must be adequately long, and the
flanges/ hardware must be in good condition.
In addition, the table insert (if using a table saw)
must be of the appropriate type for dado sets, the
arbor length must be adequately long, and the
flanges/ hardware must be in good condition.
Consult your machine’s owners’ manual for further
information.
information.
DADO/ARBOR SIZES
The following is a general guideline with regard to
dado diameter versus the appropriate size machine
and arbor size:
dado diameter versus the appropriate size machine
and arbor size:
Dado Diameter
Machine Capacity
Arbor Diameter
6" through 8"
10" through 12"
5/8" through 1"
10"
12" through 14"
5/8" through 1"
12"
14" and up
1" and up
NOTE:
Always use the smallest diameter dado set
that will accomplish the task.
IMPORTANT SAFETY/USAGE
INSTRUCTIONS PLEASE READ!!
Thank you for purchasing this top-quality cutting tool
from Amana Tool. For your safety and to achieve
good results, please read and fully understand these
instructions before using this product.
from Amana Tool. For your safety and to achieve
good results, please read and fully understand these
instructions before using this product.
DESCRIPTION
The Amana stacking dado set is a professional
quality carbide tipped tool that will give years of
trouble-free service provided that they are properly
maintained, re-sharpened and used in accordance
with this booklet and other appropriate reference
materials.
quality carbide tipped tool that will give years of
trouble-free service provided that they are properly
maintained, re-sharpened and used in accordance
with this booklet and other appropriate reference
materials.
MACHINE SELECTION
Dado sets can be used on high quality table saws or
radial arm saws with 1-1/2 or more
horsepower. Do not use this
product in any under-powered table
saw or other type of equipment
such as a miter saw, portable
circular saw, compound miter
saw, portable table saw, etc. It is
very important that your machine
is stable, free of vibration and
has minimal arbor run-out
tolerances (.003” maximum). The run-out
can easily be checked using a dial
radial arm saws with 1-1/2 or more
horsepower. Do not use this
product in any under-powered table
saw or other type of equipment
such as a miter saw, portable
circular saw, compound miter
saw, portable table saw, etc. It is
very important that your machine
is stable, free of vibration and
has minimal arbor run-out
tolerances (.003” maximum). The run-out
can easily be checked using a dial
1-1/2 HP minimum
Flanges
.003” Run-out maximum
Flanges
.003” Run-out maximum
Hardware
Table Insert
Arbor Length
Table Insert
Arbor Length
Machine Checklist
✓
❒
❒
❒
❒
❒
❒