Amana 658030-ak 8" dado set Guia Do Utilizador

indicator and magnetic base.
In addition, the table insert (if using a table saw)
must be of the appropriate type for dado sets, the
arbor length must be adequately long, and the
flanges/ hardware must be in good condition.

Consult your machine’s owners’ manual for further 
information.

The following is a general guideline with regard to
dado diameter versus the appropriate size machine
and arbor size:

Dado Diameter

Machine Capacity

Arbor Diameter

6" through 8"

10" through 12"

5/8" through 1"

10"

12" through 14" 

5/8" through 1"

12" 

14" and up

1" and up

Always use the smallest diameter dado set

that will accomplish the task. 

Thank you for purchasing this top-quality cutting tool
from Amana Tool. For your safety and to achieve
good results, please read and fully understand these
instructions before using this product.

The Amana stacking dado set is a professional 
quality carbide tipped tool that will give years of 
trouble-free service provided that they are properly
maintained, re-sharpened and used in accordance
with this booklet and other appropriate reference
materials.

Dado sets can be used on high quality table saws or
radial arm saws with 1-1/2 or more
horsepower.  Do not use this 
product in any under-powered table
saw or other type of equipment
such as a miter saw, portable 
circular saw, compound miter
saw, portable table saw, etc.  It is
very important that your machine
is stable, free of vibration and
has minimal arbor run-out 
tolerances (.003” maximum). The run-out
can easily be checked using a dial 

1-1/2 HP minimum
Flanges
.003” Run-out maximum

Hardware
Table Insert
Arbor Length

Machine Checklist  

✓

❒

❒

❒

❒

❒

❒